|
|
|
 |
Absolute Pressure Transducer
Off The Shelf - Immediate Delivery
SPT-1000 Series
• All Stainless Steel Construction
• Hermetically Sealed
• Dielectrically Isolated
• Silicon on Silicon Sensor
The SPT-1000 Series Pressure Transducer offers state of the art technology in a
low cost mechanically robust package.
Please contact Solomon Morcos for further details.
Tel:201 461-0900 • Fax:201 461-0990 • email:Solomon@kulite.com
Ultra High Temperature Amplified Miniature IS® Pressure Transducer
ETM-UHT-375(M) Series
• Smallest High Performance Amplified Transducer Worldwide
• Highest Temperature Electronics 500°F (260°C)
• Rugged Design Provides Compatibility with Most Corrosive and
Conductive Media
• High Over Pressure Capability
• High Bandwidth
• Aerospace and Downhole Quality Components
• Designed and Engineered For Severe Environmental Conditions
The ETM-UHT-375M is one of the newest generation of Kulite standard, smallest ultra high temperature miniature amplified
transducer currently available. The device incorporates Silicon on Insulator (SOI) Sensor and Electronics, thus enabling
operation up to 500°F. The metal flush daphragm is used as a force collector. Force is transferred to a solid-state
piezoresistive sensing element via thin intervening film of non-compressible silicone oil. This sensing sub-assembly is
protected from mechanical damage by a protective screen, which has been shown to have minimal influence of the frequency
response of the sensor. Incorporation of Kulite proprietary high temperature 500°F (260°C) electronics within the main
body allows for operation from an unregulated power supply of 8 to 16VDC
Please contact Elias Geras - Vice President Micro Sensors Division Automotive Products for further details.
Tel:201 461-0900 • Fax:201 461-0990 • email:LeoG@kulite.com
Miniature High Pressure IS® Pressure Transducer With Integrated Temperature Sensor
World's Smallest Pressure and Temperature Sensor at 6mm
HKL/T-1-235 (M) Series
• Combined Pressure and Temperature Capability
• Patented Leadless Technology
• Robust Construction
• Excellent Long Term Stability
The HKL/T-1-235(M) is a miniature threaded high pressure transducer/platinum RTD combination. The Pressure transducer utilizes a
patented silicon on silicon design. The platinum RTD protrudes beside the diaphragm to sense media temperature. The pressure and
temperature devices are designed to operate independently. All wetted parts of the transducer are compatible with all common aircraft
and automotive fluids.
Please contact Elias Geras - Vice President Micro Sensors Division Automotive Products for further details.
Tel:201 461-0900 • Fax:201 461-0990 • email:LeoG@kulite.com
Water Cooled IS® Transducer
Ideally suited for Automotive and Turbine Exhaust Systems
EWCT-312 (M) Series
• High Bandwidth With Integrated Amplifier
• Patented Leadless Technology
• Superior Thermal Protection
• Both Dynamic and Static Output Capabilities Available
• Extreme Temperature Capabilities Such As Required In Exhaust Systems
Kulite introduces a new small and compact Water Cooled Pressure Transducer for both dynamic and static pressure measurements
in extreme temperature environments such as automotive and turbine exhaust systems. The EWCT-312 combines Kulite's patented Low Cost
Leadless Silicon Technology and a Miniature Water Cooled Jacket to provide pressure management capabilities previously unavailable.
Please contact Elias Geras - Vice President Micro Sensors Division Automotive Products for further details.
Tel:201 461-0900 • Fax:201 461-0990 • email:LeoG@kulite.com
New High Temperature SOI Electronics
Extends the Temperature Range
of Pressure Transducers
|
Kulite Semiconductor Products, Inc. has developed new high temperature electronics to be used with high output pressure transducers, designed for pressure measurements at temperatures of +250°C (+482°F) and beyond. These transducers have a high level output, 0.5V to 5V typical, and operate with unregulated supplies from 8V to 32V.
The key factor that made these developments possible was an electronic interface designed using an SOI (Silicon On Insulator) process integrated with Kulite sensors using SOI technology.
Please click on the pdf file for details and specifications.
|
 | SOI Release |
Synchro Type IS® Pressure Transducer
Aerospace Solid State Replacement
APTE-4-2250-XXX Series
• Solid State Patented Silicon Technology
• Drop-in Replacement, Compatible With Many Synchro Indicators
• No Moving Parts
• Lower Cost Than Mechanical Counterparts
• Better Accuracy and Better Stability Than Mechanical
Counterparts
• No Friction or Position Errors
• Withstands High Vibration and Shock Levels
• Acceleration and Vibration Insensitive
• High Reliability, High MTBF
• Hermetically Sealed and EMI Protected
• Flight Certified and Used on DC-9, MD-80 Series Aircraft (PMA)
This transducer is a drop-in replacement for older type electro-mechanical synchro transducers (transmitters). It incorporates the Kulite patented Silicon on Insulator (SOI) piezoresistive sensors and custom electronics to produce a transducer Fit, Form and Function equivalent to the older parts, but with significant improvements versus the electromechanical devices.
Please contact Jim Dobbs - Manager Aircraft Transducer Sales for further details.
Tel:201 461-0900 • Fax:201 461-0990 • email:Jim@kulite.com
High Pressure 5VDC Output Ruggedized
IS® Pressure Transducer
Ideally suited for high pressure, high shock environments - with 5 VDC Output, located in a small external in-line amplifier.
ETS-1A-375 (M) Series
• 5 VDC Output
• Hybrid Microelectronic Regulator-Amplifier
• Very High Natural Frequency
• Designed For Pressure Blast Applications
• Flat response From DC to 150KHz
Designed for high pressure, high shock environments, this range of transducers is widely used in both military and commercial applications, now mated with an external in-line amplifier for a high level 5 volt DC output.
Please contact George Boctor -Vice President Miniature Transducer Sales for further details.
Tel:201 461-0900 • Fax:201 461-0990 • email:george@kulite.com
High Temperature Miniature Ruggedized Screech/Rumble IS® Pressure Transducer
With Separate Static And Dynamic Outputs
Ideally suited for instability measurement in engine environments.
ETLH-SR-190 (M) Series
• Miniature, Robust Construction
• High Temperature
• Acceleration & Vibration Insensitive
• High Bandwidth Amplifier (150 KHz)
• Patented Leadless Technology
• Screech/Rumble Measurement
• Separate DC and AC Outputs
• Dynamic and Static Capability
• Excellent Long Term Stability Coupled with High Accuracy
The ETLH-SR-190 is a high temperature extremely rugged transducer ideal for instability measurement in engine environments. It uses a patented acceleration insensitive leadless sensing element that is more than 1000 times less sensitive to vibration than other Kulite transducers. The front of the transducer can withstand temperatures of 1025°F (550°C) while the in-line amplifier can be placed in a cooler area. The amplifier is a special high frequency amplifier that allows the transducer to be used up to 150KHz.
Please contact George Boctor -Vice President Miniature Transducer Sales for further details.
Tel:201 461-0900 • Fax:201 461-0990 • email:george@kulite.com
High Temperature Miniature Ruggedized Gas Turbine IS® Pressure Transducer With
Separate Static And Dynamic Outputs
Ideally suited for instability measurement in gas turbine engine environments.
ETL-GTS-190 (M) Series
• Miniature, Robust Construction
• High Temperature
• Acceleration & Vibration Insensitive
• High Bandwidth Amplifier (150 KHz)
• Patented Leadless Technology
• Separate DC and AC Outputs
• Dynamic and Static Capability
• Excellent Long Term Stability Coupled with High Accuracy
The ETL-GTS-190 is a high temperature extremely rugged transducer ideal for instability measurement in gas turbine engine environments. It uses a patented acceleration insensitive leadless sensing element that is more than 1000 times less sensitive to vibration than other Kulite transducers. The front of the transducer can withstand temperatures of 1025°F (550°C) while the in-line amplifier can be placed in a cooler area. The amplifier is a special high frequency amplifier that allows the transducer to be used up to 150KHz.
Please contact George Boctor -Vice President Miniature Transducer Sales for further details.
Tel:201 461-0900 • Fax:201 461-0990 • email:george@kulite.com
Miniature Ruggedized Automotive IS®
Pressure Transducer
Ideally suited for the engine test
environment requiring
in cylinder pressure measurements.
XTEL-CS-190 (M) SERIES
• Robust Construction
• High Temperature
• Acceleration & Vibration Insensitive
• In Cylinder Pressure Measurement
• Dynamic and Static Capability
• Excellent Long Term Stability Coupled with High
Accuracy
The XTEL-CS-190 is a high temperature extremely rugged transducer ideal for combustion measurement
in engine environments. It uses a patented acceleration insensitive leadless sensing element that is more
than 100 times less sensitive to vibration than other Kulite transducers. The front of the transducer can
withstand temperatures of 900°F (482°C) while the compensation module which is located in the connector
can be placed in a cooler area.
Please contact George Boctor -Vice President Miniature Transducer Sales for further details.
Tel:201 461-0900 • Fax:201 461-0990 • email:george@kulite.com
Miniature Ruggedized Automotive
5VDC Output IS® Pressure Transducer
Ideally suited for the engine test
environment requiring
in cylinder pressure measurements.
ETL-CS-190 (M) SERIES
• Robust Construction
• High Temperature
• Acceleration & Vibration Insensitive
• High Bandwidth Amplifier (150 KHz)
• In Cylinder Pressure Measurement
• Dynamic and Static Capability
• Excellent Long Term Stability Coupled with High
Accuracy
The ETL-CS-190 is a high temperature extremely rugged transducer ideal for combustion measurement
in engine environments. It uses a patented acceleration insensitive leadless sensing element that is more
than 100 times less sensitive to vibration than other Kulite transducers. The front of the transducer can
withstand temperatures of 900°F (482°C) while the in-line amplifier which is located in the connector can
be placed in a cooler area. The amplifier is a special high frequency amplifier that allows the transducer
to be used up to 150KHz.
Please contact George Boctor -Vice President Miniature Transducer Sales for further details.
Tel:201 461-0900 • Fax:201 461-0990 • email:george@kulite.com
Miniature 5 VDC Output IS®
Pressure Transducer
Ideally suited for all automotive applications requiring lightweight, small size and ruggedized construction.
ETQ-12-375 (M)
• 5 VDC Output
• Hybrid Microelectronic Regulator-Amplifier
• Flush Diaphragm
• Hermetically Sealed All Welded Construction
• Secondary Containment
• Single Ended Amplifier
• 3 Wire
• Compatible With All Automotive Fluids
• Intrinsically Safe Applications Available (i.e. IS-ETQ-12-375)
The ETQ-12-375 Series of miniature transducers are flush diaphragm units utilizing standard components
commonly used in aerospace applications, coupled with Kulite patented mature, piezoresistive sensor
technology as the sensing element. Mounted within the body of the transducer is a 3-wire proprietary
hybrid regulator-amplifier design, which provides a stable, low noise 5VDC output within a 12 ± 4VDC
unregulated input. The flush diaphragm is protected against mechanical damage by a protective screen.
Typical applications include brake testing and all other automotive applications. Units are economically
designed for high volume OEM users.
FOR A FREE OF CHARGE EVALUATION PRODUCT, please contact George Boctor: george@kulite.com
Industrial OEM Amplified IS®
Pressure Transducer
DCT-1000 Series
• 5 VDC Output
• Factory Programmable Full Scale Output
• Rugged All Welded Construction
• High Overload Capability
• For High Reliability Commercial Applications
• Intrinsically Safe Applications
By coupling Kulite's unique solid state sensor with a miniature, state-of-the-art IC consisting of a precision voltage regulator, a signal conditioning circuit and a microprocessor, Kulite is able to offer the most advanced industrial pressure transducer available on the market today. Designed to measure liquid or
gas pressure, the transducer is of all-welded stainless steel construction, with integral pressure port and diaphragm. The DCT-1000 provides an extremely rugged, accurate and inexpensive means for pressure-to-voltage conversion. The ability to withstand high voltages between leads and cases make the DCT-1000 Series transducers ideally suited for a large number of applications.
FOR A FREE OF CHARGE EVALUATION PRODUCT, please contact George Boctor: george@kulite.com
Barometric Pressure Digitally Corrected
Miniature IS® Pressure Transducer
Ideally suited for air speed measurements
ET-5DC-312 Series
• Barometric Pressure Transducer
• Robust Construction
• Microprocessor Corrected
• High Accuracy
The ET-5DC-312 series is designed to measure barometric pressure from ground level to 30,000 feet. The ET-5DC-312, is designed with Kulite’s latest dielectrically isolated Patented sensing element, coupled with a microprocessor providing a digital compensation, analog output signal. The unit is ideally suited for applications where accuracy requirement is a prime importance.
FOR A FREE OF CHARGE EVALUATION PRODUCT, please contact George Boctor: george@kulite.com
Low Pressure  P Sensor Digitally Corrected Miniature IS® Pressure Transducer
Ideally suited for air speed measurements
ET-3DC-312 Series
• Differential Pressure
• Robust Construction
• Microprocessor Corrected
• High Accuracy
The ET-3DC-312 series is a highly accurate unidirectional differential pressure transducer meant to measure very low pressure differences. It is ideal for use in air speed measurements using pitot tubes. It can also be used for flow measurements or any other application where high accuracy is needed when measuring small pressures.
FOR A FREE OF CHARGE EVALUATION PRODUCT, please contact George Boctor: george@kulite.com
Miniature ID® Pressure Transducer
Smallest high performance
amplified transducer worldwide
ETM-634(X)-312(M)
ETM-634(X)-375(M)
• High Temperature Electronics 365° F (185° C)
• Rugged Design Provides Compatibility With
• Most Corrosive and Conductive Media
• High Over Pressure Capability
• Aerospace Quality Components
• Designed and Engineered For Severe
• Environmental Conditions
• 5/16-24 UNF-2A or M 8 x 1 (ETM-634-312 Series)
• 3/8-24 UNJF-3A or M 10 x 1 (ETM-634-375 Series)
The ETM-634 Series is one of the newest generation of Kulite standard, smallest miniature amplified transducer currently available. The metal flush diaphragm is used as a force collector. Force is transferred to a solid-state piezoresistive sensing element via thin intervening film of non-compressible silicone oil. This sensing sub-assembly is protected from mechanical damage by a protective screen, which has been shown to have minimal influence on the frequency response of the sensor. Incorporation of Kulite proprietary high temperature 365° F (185° C) electronics within the main body allows for operation from an unregulated power supply of 8 to 16VDC.
FOR A FREE OF CHARGE EVALUATION PRODUCT, please contact George Boctor: george@kulite.com
Differential Pressure Transducer
Ideally suited for low pressure
differential measurements in automotive
and flight test applications
XTL-3-375 (M) SERIES
• Robust Construction
• Patented Leadless Construction
• Automotive and Flight Test Applications
The XTL-3-375 series is a non-amplified differential transducer. The transducer has no internal
electronics making it extremely rugged and able to endure severe vibrations. The Kulite patented
leadless sensing element is extremely accurate even at low pressures making the XTL-3-375 ideal
for low pressure differential measurements in automotive and flight test applications.
FOR A FREE OF CHARGE EVALUATION PRODUCT, please contact George Boctor: george@kulite.com
Please contact George Boctor - Vice President Miniature Transducer Sales for further details.
Tel: 201-461-0900 • Fax: 201-461-0991 • email: george@kulite.com
|
| © 2008 Kulite Semiconductor Products, Inc. All Rights Reserved | Terms and Conditions
|
|
